Usb sound card for laptop dj full#
Usb sound card for laptop dj Pc#
Usb sound card for laptop dj Bluetooth#

Support for bluetooth function, can be connected to a tv with chipset and other devices. The card reader can be connected to tv and is compatible with most dvd players, cdrom players, digital cameras, sound cards, usb flash drives, card readers, speakers or other audio and video components. The usb power port is connected to the computer, plug in and play, you can make calls with this cable, easy to use. Usb power supply mode can charge the mobile phone or other devices.

Usb sound card for laptop dj Pc#

With this card, you can play the music of your phone through your pc to enjoy the music without drawing too much. Can be used for sd cards, tf card and other audio accessories, convenient to use. The card is equipped with a high speed microusb connector and a driver, which is convenient to operate. The core of each sound card has its own powerful function. The sound card is made of high quality plastic material, and it can be used for a long time.

The suitable is for speaker/mircophone/headphone/desktop/laptop. If some tracks broke then try joining it using single wire.Usb2.0 Sound Card Add On Cards Cmi-6206 Chipset Usb 7.1 Sound Card With Spdif & Usb Extension Cable Remote Wake-up Support - Sound Cards - AliExpress The basic info of sound card: The interface is usb/spdif.

After all this now we will check the circuit whether all tracks all fine or not using multimeter.

Now it's time for the clean the black ink from the board.

If at some places copper left then again add board in the solution. When all extra copper is etched take out the board from the solution. Wait for copper to etch for 45 minutes to 1 hour.

Then add the clad Board into the solution.

Add 50 gram solution in the flat container. Before preparing the solution wear the surgical gloves because solution can harm your skin. If some tracks broken then draw it with OHP marker.

Then check whether all tracks printed on the board or not.

Usb sound card for laptop dj full#

When the full paper rip off from the board, Board will look like the image 13th.Refer the video removing paper from board. Then immediately put the clad into water mug and starting rubbing the paper with hand until the full paper rip off from the board.I also added 1 video showing the pressing process.Press the paper on clad for 10-15 minutes until it starts looking like the 12th image added.Next step is pressing using Electric Iron.Then place the printed paper on the copper clad.Then clean the copper clad using steel scrubber until its starts shinning.Now cut the Copper clad marked portion using hexa blade or any cutting tool.You can use any gel pen that will also work. Then cut the required portion only from the full paper and mark the cutting portion on the copper clad using any sharp tip marker.You can open the gerber file with the help of any gerber viewer. I attached the gerber file in the downloads section. First of all print the mirror gerber file on the photo paper only using laser printer.Д¬rystal Oscillator small Through hole - 1.Д¬apacitor Electrolyte Through hole 1uf - 1.Д¬apacitor Electrolyte Through hole 3u3 - 2.Д¬apacitor Electrolyte Through hole 100uf - 2.Д¬apacitor Ceramic SMD 10pf (Package 1206) - 2.Д¬apacitor Ceramic SMD 1uf (Package 0603) - 6.Д¬apacitor Ceramic SMD 22pf (Package 0603) - 2.Texas Instrument PCM2912A IC - Package TQFP Д¬apacitor Ceramic SMD 100nf (Package 0603) - 1.Hand Drill and Drill Bit (0.8mm and 1 mm).